12V 105Ah 120Ah 150Ah 170Ah 180Ah 225Ah 230Ah 240Ah 250Ah Deep Cycle Lithium ion Battery
Service
Battery can be customized as your requirements.
The Lithium Advantaged
Superior “Useable” Capacity
Extended Cycle Life
Peukert’s Losses & Voltage Sag Virtually Non Existant
Size & Weight Advantages
Fast & Efficient Charging
Very Little Wasted Energy
Climate Resistance
Protect from improper handling.
Do not storage / expose the battery to direct sunlight, in places where they may be exposed to rain, excessive heat such as radiators or heaters.
Batteries stored in well-ventilated and dry environment, ideally enclosed in a protective case.
During storage, keep the temperature within the range according to the specifications of a particular article.
Do not mix with other materials.
Do not stack cardboard box with batteries. When stacking may cause deformation of the battery in the lower layers and the subsequent flow of electrolyte.
For additional transportation / handling and packing materials, choose the method of packaging to prevent unintentional electrical contact and corrosion terminals, providing protection against environmental influences and mechanical damage.
Considerate handling of the boxes. Rough handling can cause a short circuit or damage.
Ensure proper circulation of stocks, follow FIFO system (First In, First Out).
Check the voltage of the cell every 2 month. Charge the cell if the voltage dropped to a minimum value of voltage
Battery applications
Solar and Wind Off Grid systems
PV Solar panel for solar off-grid and tied-grid systems
The batteries used to store solar and wind energy are currently mainly lead-acid batteries. Short lifespan and low cycle number of lead acid batteries make it a weak candidate for environment and cost efficiency.
Supply of continuous source of energy on a local mode is the key issue
Solar panels do not work at night or in cloudy conditions, wind mills depend on wind conditions, power generators depend on oil supply.
Real time energy generation has to be stored to optimize domestic use with no rupture of energy and permanent control on the storage reserve level.
Storage capability must be durably reliable, eco friendly and ready to handle long short cut of power supply.
Lithium-Ion batteries allow to equip solar or wind “off-grid” power stations, replacing the legacy banks of lead-acid batteries.
FAQ
What can i use PowerBrick+ battery for ?
Batteries are commonly used for Marine, Recreational vehicles, Golf Cart applications, CCTV, robotics, PV energy storage, etc..
Battery can be used for any system or application that would normally use Lead acid battery (AGM, GEL) in 12V, up to 48V. After removing your old batteries, place PowerBrick+ batterie in the same way.
You may use the same cables to reconnect battery.
| Specifications | 12V |
| Nominal capacity | 105Ah 120Ah 150Ah 170Ah 180Ah 225Ah 230Ah 240Ah 250Ah |
| Nominal voltage | 12.8V |
| Storage | / |
| Cell inside | 3.2V LiFePO4 cells |
| Size | Customized |
| Weight | / |
Max continuous load current (23°C)
Peak load current (30s)
Cut-off voltage (BMS) | Customized
10.8V |
| Max charge voltage (CCV) | 14.6V |
| Min discharge voltage | 10.8V |
| DC internal resistance | 30 mOhm |
| Charge Temperature Range | 0-45C |
| Discharge Temperature Range | -20-60C |
| PCM/BMS | 12V 4S Customized |
| Case | IP65 Metal or ABS Plastic Box |
| Charging cycles | +2000 times |
| Application | Solar System |
| Features | Long cycle life ,easy to replacement ,with handles |
Applications
Other produces
Product Tags:
|
|
250Ah EV Lithium Battery Pack Climate Resistance High Energy Density Eco Friendly Images
|
